REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE V-BANK COVER |
![]() ![]() |
Remove the 2 nuts, then remove the V-bank cover.
| 3. REMOVE AIR CLEANER ASSEMBLY |
![]() ![]() |
Disconnect the No. 2 ventilation hose.
Disconnect the vacuum hose.

Disconnect the mass air flow meter connector.
Disengage the 2 wire harness clamps.
Loosen the 2 hose clamps.

Remove the 2 bolts.
Disconnect the air cleaner hose and remove the air cleaner.
| 4. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY |
![]() ![]() |
Disconnect the connector.
Disconnect the 2 vacuum hoses.
Remove the bolt and No. 1 vacuum switching valve from the intake air surge tank.



