2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012

HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

  1. B130749
    Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Disengage the 10 clips and remove the rear seatback board carpet.


2. REMOVE REAR SEATBACK ASSEMBLY RH

  1. B135127
    Pull up the rear seatback.

  1. Remove the bolt and the anchor plate of the rear center seat outer belt.

  1. B130750
    Remove the rear seat inner belt from the rear seatback holder.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Remove the 2 bolts.

  1. Disengage the hook and remove the rear seatback.


3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

  1. B130720
    Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Disengage the 8 clips and remove the rear seatback board carpet.


4. REMOVE REAR SEATBACK ASSEMBLY LH

  1. B130721
    Remove the rear center seat inner belt from the rear seatback holder.

  1. Remove the 2 bolts.

  1. Disengage the hook and remove the rear seatback.


5. REMOVE REAR FLOOR BOARD

  1. B135073E05
    Remove the bolt and the luggage hold belt striker.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

    HINT:
    Use the same procedure for both sides.

  1. B135075
    Disengage the clip and the claw and remove the rear floor board.


6. REMOVE REAR FLOOR MAT SUPPORT PLATE

  1. B130592
    Remove the 5 screws.

  1. B130593
    Disengage the 11 claws and remove the rear floor mat support plate.


7. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT:
Use the same procedure for both sides.

  1. B179163E04
    Remove the cap.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

  1. Remove the bolt and the luggage hold belt striker.


8. REMOVE REAR FLOOR MAT ASSEMBLY

  1. B130594
    Using a clip remover, remove the 2 clips and the rear floor mat.


9. REMOVE FRONT DOOR SCUFF PLATE RH

  1. B130597
    Disengage the 14 claws and remove the front door scuff plate.


10. REMOVE FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.


11. REMOVE ACCESS DOOR SCUFF PLATE RH

  1. B130598
    Disengage the 6 claws and remove the access door scuff plate.


12. REMOVE ACCESS DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.


13. REMOVE FRONT FLOOR FOOTREST (for LHD)

  1. B130586
    Disengage the 4 claws and remove the front floor footrest.


14. REMOVE FOOTREST CLIP (for LHD)

  1. B130587
    Remove the 2 footrest clips.


15. REMOVE COWL SIDE TRIM BOARD RH

  1. B130599
    Remove the clip.

  1. Disengage the 2 claws and remove the cowl side trim board.


16. REMOVE COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure as for the RH side.


17. REMOVE ROOF SIDE INNER GARNISH COVER RH

B130600E03

HINT:
Use the same procedure for both sides.

Text in Illustration 
*1
Protective Tape
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the roof side inner garnish cover.


18. REMOVE ROOF SIDE INNER GARNISH COVER LH

HINT:
Use the same procedure as for the RH side.


19. REMOVE ROOF SIDE RAIL GARNISH RH

  1. B267104
    Remove the 2 bolts.

  1. Disengage the claw and the guide and remove the roof side rail garnish.


20. REMOVE ROOF SIDE RAIL GARNISH LH

HINT:
Use the same procedure as for the RH side.


21. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  1. B130603
    Remove the front door opening trim weatherstrip.


22. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side.


23. REMOVE ASSIST GRIP PLUG

B175647E04

HINT:
Use the same procedure to remove all the assist grip plugs.

Text in Illustration 
*1
Protective Tape
*a
for RH Side
*b
for LH Side
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the assist grip plug.


24. REMOVE ASSIST GRIP ASSEMBLY

B175648E04

HINT:
Use the same procedure to remove all the assist grips.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Remove the 2 screws and the assist grip.


25. REMOVE VISOR SUB-ASSEMBLY RH

  1. B267107
    Disengage the 2 claws and remove the visor sub-assembly.


26. REMOVE VISOR SUB-ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.


27. REMOVE FRONT PILLAR GARNISH RH

  1. w/ Assist Grip:

    1. B267110
      Disengage the 2 clips and the guide and remove the front pillar garnish.

  1. w/o Assist Grip:

    1. B271488E01
      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.
      Text in Illustration 
      *1
      Protective Tape

    2. B271489
      Remove the bolt.

    3. Disengage the 2 clips and the guide and remove the front pillar garnish.


28. REMOVE FRONT PILLAR GARNISH LH

HINT:
Use the same procedure as for the RH side.


29. REMOVE DECK SIDE GARNISH (w/ Woofer)

  1. B271490
    Disengage the 6 claws and remove the rear deck side garnish.


30. REMOVE SPEAKER MOUNTING COVER (w/ Woofer)

  1. E220885
    Disengage the 8 clips and 2 guides and remove the speaker mounting cover.


31. REMOVE AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer)

  1. E220886
    Disconnect the connectors.

  1. Remove the 4 screws and the amplifier box speaker.


32. REMOVE PACKAGE HOLDER NET HOOK

B271495E01

HINT:
Use the same procedure to remove all the package holder net hooks.

Text in Illustration 
*a
for RH Side without Woofer
*b
for LH Side
  1. Remove the screw and the package holder net hook.


33. REMOVE QUARTER TRIM POCKET TRAY (w/o Woofer)

  1. B130611
    Disengage the 7 claws and remove the quarter trim pocket tray.


34. REMOVE SIDE TRIM COVER (w/o Woofer)

  1. B267111
    Disengage the 6 claws and the 2 guides and remove the side trim cover.


35. REMOVE QUARTER TRIM POCKET (w/o Woofer)

  1. B130613
    Disengage the 6 claws and remove the quarter trim pocket.


36. REMOVE LAP BELT OUTER ANCHOR COVER

B130614E05

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Disengage the 3 claws and remove the lap belt outer anchor cover.


37. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH

  1. B130615
    Remove the bolt and the anchor plate.


38. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.


39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

  1. B130616
    Remove the 3 screws and the bolt.

  1. B130617
    Disengage the 6 clips and the 8 claws and remove the deck trim side panel.

  1. w/ Rear Power Outlet Socket:

    1. Disconnect the 2 connectors.


40. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

  1. B130618
    Remove the 3 screws.

  1. B130619
    Disengage the 6 clips and the 8 claws and remove the deck trim side panel.


41. REMOVE ROOF SIDE INNER GARNISH RH

  1. B130620E03
    Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.
    Text in Illustration 
    *1
    Protective Tape

  1. B267112
    Remove the bolt and the clip.

  1. Disengage the 7 clips and the guide and remove the roof side inner garnish.

  1. Pass the rear seat outer belt through the slit in the roof side inner garnish.


42. REMOVE ROOF SIDE INNER GARNISH LH

HINT:
Use the same procedure as for the RH side.


43. REMOVE ROOF HEADLINING HOLE PLUG (w/ Curtain Shield Airbag)

B130623E05

HINT:
Use the same procedure for both sides.

Text in Illustration 
*1
Protective Tape
*a
for RH Side
*b
for LH Side
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and open the cover.

  1. B130625E05
    Remove the bolt.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

  1. Disengage the claw and remove the roof headlining hole plug.


44. REMOVE COAT HOOK

B130626E05

HINT:
Use the same procedure for both sides.

Text in Illustration 
*1
Protective Tape
*a
for RH Side
*b
for LH Side
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.

  1. B130628E05
    Remove the bolt and the coat hook.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side


45. REMOVE VISOR ASSEMBLY RH

  1. B130629
    Remove the visor support shaft from the visor holder.

  1. Remove the 2 screws and the visor.


46. REMOVE VISOR ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.


47. REMOVE VISOR HOLDER

B130630E05

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Disengage the 2 claws by turning the visor counterclockwise between 60 to 120° and remove the visor holder.

    HINT:
    The claw may be damaged during removal. However, it is reusable because this does not effect its function.


48. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
(Click here)

49. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
(Click here)

50. REMOVE ROOM LIGHT ASSEMBLY

B138411

HINT:
The procedure described below is for the front side. Use the same procedure for both the front and rear sides, unless otherwise specified.

  1. B138408E03
    Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light lens.
    Text in Illustration 
    *1
    Protective Tape

  1. E114442E03
    Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light.
    Text in Illustration 
    *1
    Protective Tape

  1. B138413E03
    for Front Side:
    Text in Illustration 
    *1
    Protective Tape

    1. Remove the 2 wire harnesses from the 2 claws of the room light.

    2. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.

  1. B138412E03
    for Rear Side:
    Text in Illustration 
    *1
    Protective Tape

    1. Remove the wire harness from the claw of the room light.

    2. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.


51. REMOVE PERSONAL LIGHT ASSEMBLY (w/ CRAWL)

  1. E260472
    Using a moulding remover, disengage the 4 clips and 4 guides.

  1. E260473E01
    Disconnect the connector and remove the personal light assembly.
    Text in Illustration 
    *1
    Grommet
    *2
    Pin

  1. Remove the 4 pins.

  1. Remove the 4 grommets from the body side.


52. SEPARATE ROOF HEADLINING

  1. B208620
    Using a clip remover, disengage the 4 clamps.

  1. Using a clip remover, remove the 4 clips.

    B130645


53. REMOVE ROOF SPEAKER ASSEMBLY

  1. B138761
    Remove the hole cover.

  1. B138419
    Disconnect the speaker connector.

  1. Loosen the screw.

  1. B138479
    Remove the roof speaker by turning it in the direction of the arrow shown in the illustration.

← REMOVAL (Nov 2010 – Jul 2012)INSTALLATION (Jul 2007 – Oct 2010) →