2011-2016 FJ Cruiser · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL REAR SEATBACK ASSEMBLY

  1. B130721E01
    Engage the hook and temporarily install the rear seatback with the 2 bolts.

  1. Tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Install the rear center seat inner belt into the rear seatback holder.


2. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY

  1. B130720
    Engage the 8 clips and install the rear seatback board carpet.

  1. Pull up the rear seatback.


3. INSTALL REAR SEAT CUSHION ASSEMBLY

  1. B130719E01
    Insert the 2 locating pins into the body hole.

  1. Temporarily install the rear seat cushion with the 2 bolts.

  1. Tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

← REASSEMBLY (from Jul 2007)COMPONENTS (from Jul 2007) →