2011-2016 FJ Cruiser · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jul 2007

CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.


1. INSTALL REAR SEATBACK COVER

  1. B130745E01
    Using hog ring pliers, install the rear seatback cover with 8 new hog rings.

    NOTICE:
    1. Do not soil or scratch the rear seatback cover.
    2. When installing the hog rings, minimize wrinkles as far as possible.

  1. Pass the hook of the rear seatback cover through the slit in the rear seatback pad.


2. INSTALL REAR SEATBACK LOCK ASSEMBLY

  1. B130742
    Install the rear seatback lock with the 2 bolts.

    Torque:
    18 N*m{ 185 kgf*cm , 13 ft.*lbf }


3. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY

  1. B130738
    Install the rear seatback frame.

  1. B130737E01
    Using hog ring pliers, install 14 new hog rings.


4. INSTALL REAR SEATBACK STOP BUTTON GROMMET

  1. B130741
    Engage the 2 claws and install the rear seatback stop button grommet.


5. INSTALL REAR SEATBACK LOCK RELEASE BUTTON

  1. B130743
    Install the rear seatback lock release button.


6. INSTALL REAR SEAT HEADREST SUPPORT

B130740E01

HINT:
Use the same procedure for both sides.

  1. Align the protruding portion of the rear seat headrest support with the installation groove of the rear seatback frame.

  1. Engage the 2 claws and install the rear seat headrest support.


7. INSTALL TETHER ANCHOR COVER

  1. B130735
    Engage the 3 claws and install the tether anchor cover.

  1. B130733
    Engage the 2 claws and close the cover.


8. INSTALL REAR SEATBACK LOCK COVER

  1. B130731
    Engage the claw and install the rear seatback lock cover.

  1. Tighten the screw.


9. INSTALL REAR SEAT HEADREST ASSEMBLY

  1. B130730E01
    Push the lock button of the rear seat headrest support and install the rear seat headrest.


10. INSTALL REAR SEAT CUSHION COVER

  1. B130728E01
    Using hog ring pliers, install the rear seat cushion cover with 10 new hog rings.

    NOTICE:
    1. Do not soil or scratch the rear seat cushion cover.
    2. When installing the hog rings, minimize wrinkles as far as possible.


11. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY

  1. B130726
    Engage the hook and install the rear seat cushion frame.


12. INSTALL REAR SEAT CUSHION STOPPER

  1. B130725
    Install the rear seat cushion stopper with the screw.


13. INSTALL REAR SEAT CUSHION UNDER COVER

  1. B130724E01
    Insert the rear seat cushion stopper into the slit of the rear seat cushion under cover.

  1. Install the rear seat cushion under cover with the 5 clips.

  1. Install the rear seat cushion stopper into the rear seat cushion cover band.


14. INSTALL REAR SEAT CUSHION HINGE SUB-ASSEMBLY

B130723

HINT:
Use the same procedure for both sides.

  1. Engage the hook and install the rear seat cushion hinge.

  1. Install the rear seat cushion hinge with the bolt.

    Torque:
    18 N*m{ 185 kgf*cm , 13 ft.*lbf }

← DISASSEMBLY (from Jul 2007)INSTALLATION (from Jul 2007) →