2011-2016 FJ Cruiser · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2007

CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.


1. REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY

B130723

HINT:
Use the same procedure for both sides.

  1. Remove the bolt.

  1. Disengage the hook and remove the rear seat cushion hinge.


2. REMOVE REAR SEAT CUSHION UNDER COVER

  1. B130724E01
    Remove the rear seat cushion stopper from the rear seat cushion cover band and the slit of the rear seat cushion under cover.

  1. Using a clip remover, remove the 5 clips and the rear seat cushion under cover.


3. REMOVE REAR SEAT CUSHION STOPPER

  1. B130725
    Remove the screw and the rear seat cushion stopper.


4. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY

  1. B130726
    Disengage the hook and remove the rear seat cushion frame.


5. REMOVE REAR SEAT CUSHION COVER

  1. B130727
    Remove the 10 hog rings and the rear seat cushion cover.


6. REMOVE REAR SEAT HEADREST ASSEMBLY

  1. B130730E01
    Push the lock button of the rear seat headrest support and remove the rear seat headrest.


7. REMOVE REAR SEATBACK LOCK COVER

  1. B130731
    Remove the screw.

  1. Disengage the claw and remove the rear seat back lock cover.


8. REMOVE TETHER ANCHOR COVER

  1. B130732E01
    Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the cover.

  1. B130734E01
    Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the tether anchor cover.


9. REMOVE REAR SEAT HEADREST SUPPORT

  1. B130736
    Remove the 14 hog rings.

  1. B130739
    Disengage the 2 claws and remove the rear seat headrest support.

    HINT:
    Use the same procedure for both sides.


10. REMOVE REAR SEATBACK LOCK RELEASE BUTTON

  1. B130743
    Remove the rear seatback lock release button.


11. REMOVE REAR SEATBACK STOP BUTTON GROMMET

  1. B130741
    Disengage the 2 claws and remove the rear seatback stop button grommet.


12. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY

  1. B130738
    Remove the rear seatback frame.


13. REMOVE REAR SEATBACK LOCK ASSEMBLY

  1. B130742
    Remove the 2 bolts and the rear seatback lock.


14. REMOVE REAR SEATBACK COVER

  1. B130744
    Pass the hook of the rear seatback cover through the slit in the rear seatback pad.

  1. Remove the 8 hog rings and the rear seatback cover.

← REMOVAL (from Jul 2007)REASSEMBLY (from Jul 2007) →