DISASSEMBLY
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
- CAUTION:
- Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.
| 1.
REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY |
 |
- HINT:
- Use the same procedure for both sides.
Remove the bolt.
Disengage the hook and remove the rear seat cushion hinge.
| 2.
REMOVE REAR SEAT CUSHION UNDER COVER |
 |
- Remove the rear seat cushion stopper from the rear seat cushion cover band and the slit of the rear seat cushion under cover.
Using a clip remover, remove the 7 clips and the rear seat cushion under cover.
| 3.
REMOVE REAR SEAT CUSHION STOPPER |
 |
- Remove the screw and the rear seat cushion stopper.
| 4.
REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY |
 |
- Disengage the hook and remove the rear seat cushion frame.
| 5.
REMOVE REAR SEAT CUSHION COVER |
 |
- Remove the 10 hog rings and the rear seat cushion cover.
| 6.
REMOVE REAR SEAT HEADREST ASSEMBLY |
 |
- Push the lock button of the rear seat headrest support and remove the rear seat headrest.
| 7.
REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
 |
- Push the lock button of the rear seat headrest support and remove the rear seat headrest.
| 8.
REMOVE REAR SEAT SHOULDER BELT COVER |
 |
- Disengage the 4 claws and remove the rear seat shoulder belt cover.
| 9.
REMOVE REAR SEATBACK LOCK COVER |
 |
- Remove the screw.
Disengage the claw and remove the rear seatback lock cover.
| 10.
REMOVE TETHER ANCHOR COVER |
 |
- HINT:
- Use the same procedure for both sides.
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the cover.
- Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the tether anchor cover.
| 11.
REMOVE REAR SEAT HEADREST SUPPORT |
 |
- Remove the 17 hog rings.
- Disengage the 2 claws and remove the rear seat headrest support.
- HINT:
- Use the same procedure to remove all the rear seat headrest supports.
| 12.
REMOVE REAR SEATBACK LOCK RELEASE BUTTON |
 |
- Remove the rear seatback lock release button.
| 13.
REMOVE REAR SEATBACK STOP BUTTON GROMMET |
 |
- Disengage the 2 claws and remove the rear seatback stop button grommet.
| 14.
REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY |
 |
- Remove the belt of the rear center seat outer belt from the rear seatback cover band.
- Remove the rear seatback frame.
| 15.
REMOVE REAR SEATBACK LOCK ASSEMBLY |
 |
- Remove the 2 bolts and the rear seatback lock.
| 16.
REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY
|
 |
- Remove the nut and the rear center seat outer belt.
| 17.
REMOVE REAR SEATBACK COVER |
 |
- Pass the hook of the rear seatback cover through the slit in the rear seatback pad.
Remove the 8 hog rings and the rear seatback cover.