2011-2016 FJ Cruiser · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010

CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.


1. REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY

B130752

HINT:
Use the same procedure for both sides.

  1. Remove the bolt.

  1. Disengage the hook and remove the rear seat cushion hinge.


2. REMOVE REAR SEAT CUSHION UNDER COVER

  1. B130753E02
    Remove the rear seat cushion stopper from the rear seat cushion cover band and the slit of the rear seat cushion under cover.
    Text in Illustration 
    *1
    Band

  1. Using a clip remover, remove the 7 clips and the rear seat cushion under cover.


3. REMOVE REAR SEAT CUSHION STOPPER

  1. B130754
    Remove the screw and the rear seat cushion stopper.


4. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY

  1. B130755
    Disengage the hook and remove the rear seat cushion frame.


5. REMOVE REAR SEAT CUSHION COVER

  1. B130756
    Remove the 10 hog rings and the rear seat cushion cover.


6. REMOVE REAR SEAT HEADREST ASSEMBLY

  1. B130759E02
    Push the lock button of the rear seat headrest support and remove the rear seat headrest.
    Text in Illustration 
    *1
    Lock Button


7. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

  1. B130760E02
    Push the lock button of the rear seat headrest support and remove the rear seat headrest.
    Text in Illustration 
    *1
    Lock Button


8. REMOVE SHOULDER BELT ANCHOR COVER

  1. B267854
    Disengage the 2 claws and 2 guides, remove the shoulder belt anchor cover.


9. REMOVE REAR SEAT SHOULDER BELT COVER

  1. B267855
    Disengage the 4 claws and remove the rear seat shoulder belt cover.


10. REMOVE REAR SEATBACK LOCK COVER

  1. B130761
    Remove the screw.

  1. Disengage the claw and remove the rear seatback lock cover.


11. REMOVE TETHER ANCHOR COVER

B130762E02
Text in Illustration 
*1
Protective Tape

HINT:
Use the same procedure for both sides.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the cover.

  1. B130764E02
    Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the tether anchor cover.
    Text in Illustration 
    *1
    Protective Tape


12. REMOVE REAR SEAT HEADREST SUPPORT

  1. B130766
    Remove the 17 hog rings.

  1. B130769
    Disengage the 2 claws and remove the rear seat headrest support.

    HINT:
    Use the same procedure to remove all the rear seat headrest supports.


13. REMOVE REAR SEATBACK LOCK RELEASE BUTTON

  1. B130773
    Remove the rear seatback lock release button.


14. REMOVE REAR SEATBACK STOP BUTTON GROMMET

  1. B130771
    Disengage the 2 claws and remove the rear seatback stop button grommet.


15. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY

  1. B135129E02
    Remove the belt of the rear center seat outer belt from the rear seatback cover band.
    Text in Illustration 
    *1
    Band

  1. B130768
    Remove the rear seatback frame.


16. REMOVE REAR SEATBACK LOCK ASSEMBLY

  1. B130772
    Remove the 2 bolts and the rear seatback lock.


17. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY

  1. B135154
    Remove the nut and the rear center seat outer belt.


18. REMOVE REAR SEATBACK COVER

  1. B130774
    Pass the hook of the rear seatback cover through the slit in the rear seatback pad.

  1. Remove the 8 hog rings and the rear seatback cover.

← DISASSEMBLY (Jul 2007 – Oct 2010)REASSEMBLY (Jul 2007 – Oct 2010) →