2011-2016 FJ Cruiser · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

  1. B268600E01
    Check the resistance.
    Text in Illustration 
    *a
    Front view of wire harness connector
    (to Front Seat Inner Belt (Driver Side))

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Tongue plate fastened
      10 kΩ or higher
      1 - 2
      Tongue plate released
      Below 1 Ω

      If the result is not as specified, replace the front seat inner belt.


REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

  1. B264130E01
    Check the resistance.
    Text in Illustration 
    *a
    Front view of wire harness connector
    (to Front Seat Inner Belt (Front Passenger Side))

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      A-3 - B-1
      Tongue plate fastened
      10 kΩ or higher
      A-3 - B-1
      Tongue plate released
      Below 1 Ω
      A-2 - B-3
      Always
      Below 1 Ω

      If the result is not as specified, replace the front seat inner belt.

← INSPECTION (Jul 2007 – Oct 2010)INSTALLATION (Jul 2007 – Oct 2010) →