2011-2016 FJ Cruiser · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

  1. B135157E02
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      10 - 11
      Tongue plate fastened
      10 kΩ or higher
      10 - 11
      Tongue plate released
      Below 1 Ω

      If the result is not as specified, replace the front seat inner belt.


REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

  1. B177954E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      A-3 - B-1
      Tongue plate fastened
      10 kΩ or higher
      A-3 - B-1
      Tongue plate released
      Below 1 Ω

      If the result is not as specified, replace the front seat inner belt.

← REMOVAL (from Aug 2012)INSPECTION (from Nov 2010) →