2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010

HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

  1. B135133
    Install the clamp.

  1. Insert the 2 hooks into the 2 cutout of the front speaker bracket and install the front No. 2 speaker with the 2 bolts.

    Torque:
    8.1 N*m{ 85 kgf*cm , 72 in.*lbf }


2. INSTALL FRONT SPEAKER BRACKET

  1. B135134
    Connect the speaker connector.

  1. Insert the 2 hooks into the 2 instrument panel holes and install the front speaker bracket with the 2 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }


3. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← REMOVAL (from Nov 2010)INSTALLATION (from Nov 2010) →