2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010

HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. INSTALL FRONT SPEAKER BRACKET (except 10 Speakers)

  1. E219214
    Install the clamp.

  1. Insert the 2 hooks into the 2 cutouts of the front speaker bracket and install the front No. 2 speaker with the 2 bolts.

    Torque:
    8.1 N*m{ 83 kgf*cm , 72 in.*lbf }


2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

  1. E219215
    Connect the speaker connector.

  1. Insert the 2 hooks into the 2 instrument panel holes and install the front speaker with the 2 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }


3. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
  1. Engage the 4 clips and claw and install the instrument panel speaker panel.

← INSTALLATION (Jul 2007 – Oct 2010)COMPONENTS (Jul 2007 – Jul 2012) →