ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT ROOF SPEAKER ASSEMBLY |
![]() ![]() |
- HINT:
- Remove interior parts so that the roof speaker can be seen.
Check the speaker installation.
- OK:
- The speaker is securely installed.
Visually check the speaker.
- OK:
- The metal arm of speaker is not bended.
The screw of speaker is not loosened.
Check the resistance.
Disconnect the speaker connector.
Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Tester connection
Specified Condition
1 - 2
Approximately 4 Ω


