2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009


REMOVE AIR FUEL RATIO SENSOR

A128842E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance (for Bank 1):
      Tester Connection
      Specified Condition
      1 (HA1A) - 2 (+B)
      1.8 to 3.4 Ω at 20°C (68°F)
      1 (HA1A) - 4 (A1A-)
      10 kΩor higher

      Standard resistance (for Bank 2):
      Tester Connection
      Specified Condition
      1 (HA2A) - 2 (+B)
      1.8 to 3.4 Ω at 20°C (68°F)
      1 (HA2A) - 4 (A2A-)
      10 kΩor higher

      If the result is not as specified, replace the air fuel ratio sensor.

← REMOVAL (Jul 2007 – Jul 2009)INSTALLATION (Jul 2007 – Jul 2009) →