REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
- CAUTION:
- Wear protective gloves when removing the sensor.
- The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe assembly has cooled down before removing it.
- Wear protective gloves when removing the sensor.
| 1. REMOVE AIR FUEL RATIO SENSOR |
Remove the 3 bolts, then remove the No. 2 exhaust manifold stay. (for LH Bank)

Disconnect the 2 air fuel ratio sensor connectors.
Using SST, remove the 2 air fuel ratio sensors from the exhaust manifold.
- SST
- 09224-00010


