2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Aug 2009 – Oct 2010

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010


1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
  1. Disconnect the sensor connector.

  1. A229665E01
    Using SST, remove the sensor.
    SST
    09224-00010  


2. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
  1. Disconnect the sensor connector.

  1. A223689E02
    Using SST, remove the sensor.
    SST
    09224-00010  


3. REMOVE TAIL EXHAUST PIPE ASSEMBLY

  1. A129936
    Remove the 2 bolts and separate the exhaust pipe support, then remove the tail exhaust pipe.


4. REMOVE CENTER EXHAUST PIPE ASSEMBLY

  1. A129937
    Remove the 2 bolts and 2 compression springs, then separate the center exhaust pipe.

  1. Separate the 4 exhaust pipe supports from the center exhaust pipe, then remove the center exhaust pipe.


5. REMOVE NO. 2 FRONT EXHAUST PIPE ASSEMBLY

  1. A129939
    Remove the 2 bolts, then remove the exhaust pipe stopper bracket. (for 4WD)

  1. A129938
    Remove the 2 bolts and 2 nuts and separate the exhaust pipe support, then remove the No. 2 front exhaust pipe.


6. REMOVE FRONT EXHAUST PIPE ASSEMBLY

  1. A128851
    Remove the 2 nuts, then remove the front exhaust pipe.

  1. Remove the front exhaust pipe gasket.

← REMOVAL (Jul 2007 – Jul 2009)REMOVAL (from Nov 2010) →