REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY |
 |
Remove the 4 bolts, then remove the No. 2 engine under cover assembly.
| 3.
REMOVE NO. 2 EXHAUST MANIFOLD STAY |
 |
- Remove the 3 bolts, then remove the No. 2 manifold stay.
| 4.
REMOVE WIRE HARNESS |
 |
- Remove the bolt, then separate the earth wire harness from the cylinder block.
| 5.
REMOVE STARTER ASSEMBLY |
 |
- Disconnect the terminal 50 connector from the starter assembly.
Remove the nut, then disconnect the wire harness from the terminal 30.
- Remove the 2 bolts, then remove the starter assembly.