REMOVAL
Removal / installation · Vehicles built Nov 2010 – Jul 2014
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH |
 |
Remove the exhaust manifold (Click here).
| 3.
REMOVE STARTER COVER |
 |
- Remove the 3 bolts and starter cover.
| 4.
REMOVE STARTER ASSEMBLY |
 |
- Remove the bolt and ground wire.
Disconnect the starter connector.
Open the terminal cap.
Remove the nut and bolt, and then disconnect the starter wire.
- Remove the 2 bolts and starter.
| 5.
REMOVE FLYWHEEL HOUSING SIDE COVER |
 |