REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
| 2.
REMOVE V-BANK COVER
|
 |
Remove the 2 nuts, then remove the V-bank cover.
| 3.
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
|
 |
Remove the 4 bolts, then remove the No. 1 engine under cover.
| 4.
REMOVE FAN & GENERATOR V BELT
|
 |
While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.
| 5.
REMOVE GENERATOR ASSEMBLY |
 |
Disconnect the wire harness.
Remove the bolt and wire harness stay.
Disconnect the connector from the generator assembly.
- Remove the terminal cap and nut.
Disconnect the wire harness from terminal B.
- Remove the 2 bolts, then separate the wire harness clamp bracket from the generator assembly.
- Remove the 2 bolts, then remove the generator assembly.