2011-2016 FJ Cruiser · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Jul 2007 – Jul 2012

Versions by build date: Jul 2007 – Jul 2012 Aug 2012 – Oct 2012 from Nov 2012


1. REMOVE REAR BUMPER COVER

  1. B190458E01
    Apply protective tape as shown in the illustration.

  1. B198720
    Remove the clip.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. B190459
    Remove the 7 bolts and the 2 screws.

  1. B198721
    Disengage the wire harness clamp, and disconnect the connector.

  1. B190460
    Disengage the 6 claws and the 2 clips and remove the rear bumper cover.


2. REMOVE REAR BUMPER END RETAINER LH

  1. B134750
    Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper end retainer.


3. REMOVE REAR BUMPER END RETAINER RH

HINT:
Use the same procedure as for the LH side.


4. REMOVE REAR BUMPER UPPER RETAINER LH

  1. B134751
    Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper upper retainer.


5. REMOVE REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure as for the LH side.


6. REMOVE REAR BUMPER ENERGY ABSORBER

  1. B190461
    Remove the rear bumper energy absorber.


7. REMOVE REAR BUMPER SIDE STAY LH

  1. B138423
    Remove the bolt and the rear bumper side stay.


8. REMOVE REAR BUMPER SIDE STAY RH

HINT:
Use the same procedure as for the LH side.


9. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY LH

  1. B135071
    Remove the 2 bolts and the rear bumper side support.


10. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.


11. REMOVE REAR BUMPER BAR BRACKET LH

  1. B190462
    Remove the 2 bolts and the rear bumper bar bracket.


12. REMOVE REAR BUMPER BAR BRACKET RH

HINT:
Use the same procedure as for the LH side.

← COMPONENTS (from Nov 2012)REMOVAL (Aug 2012 – Oct 2012) →