2011-2016 FJ Cruiser · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2007

HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

  1. B135101
    Engage the 8 claws and install a new front door glass outer weatherstrip.

  1. B135099E01
    Remove the protective tape.


2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

  1. B135564
    Install the outer rear view mirror with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the connector.


3. INSTALL FRONT DOOR NO. 2 SERVICE HOLE COVER

HINT:
Use the same procedure as for the RH side (Click here ).


4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side (Click here).


5. INSTALL FRONT DOOR ARMREST BASE UPPER PANEL

HINT:
Use the same procedure as for the RH side (Click here).


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← REMOVAL (from Jul 2007)COMPONENTS (from Jul 2007) →