REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE V-BANK COVER |
![]() ![]() |
Remove the 2 nuts, then remove the V-bank cover.
| 3. REMOVE DUTY VACUUM SWITCHING VALVE |
![]() ![]() |
Disconnect the connector.
Disconnect the fuel vapor feed hose.
Remove the bolt, then separate the vacuum switching valve from the intake air surge tank.

Disconnect the hose, then remove the vacuum switching valve.


