DISASSEMBLY
Removal / installation · Vehicles built from Aug 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
- NOTICE:
- Do not disconnect the hoses indicated in the illustration.

| 1.
REMOVE FUEL SENDER GAUGE ASSEMBLY
|
 |
- Disconnect the fuel sender gauge connector.
- Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward to remove it.
Text in Illustration
 
|
Press Down
|
 
|
Slide
|
| 2.
REMOVE NO. 1 FUEL SUB-TANK |
 |
- Disconnect the fuel pump connector.
- Disconnect the jet pump from the No. 1 fuel sub-tank.
Text in Illustration
*1
|
Jet Pump
|
*2
|
Protective Tape
|
Using a screwdriver with its tip wrapped in protective tape, disengage the claw from the No. 1 fuel sub-tank.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
- Disengage the 3 claws.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
- Disengage the 3 claws and remove the No. 1 fuel sub-tank.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
| 3.
REMOVE FUEL PUMP |
 |
- Disengage the 5 claws and separate the fuel pump from the fuel filter case.
Text in Illustration
*1
|
Fuel Filter Case
|
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
- Remove the O-ring and fuel pump spacer from the fuel pump.
Text in Illustration
*1
|
O-ring
|
*2
|
Fuel Pump Spacer
|
| 4.
REMOVE FUEL MAIN VALVE ASSEMBLY |
 |
- Remove the fuel main valve from the fuel filter case.
Text in Illustration
*1
|
Fuel Filter Case
|
*2
|
O-ring
|
Remove the 2 O-rings from the fuel main valve.