DISASSEMBLY
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| 1.
REMOVE FUEL SENDER GAUGE ASSEMBLY |
 |
Disconnect the connector.
- Disengage the claw and remove the sender gauge by sliding it in the direction shown in the illustration.
| 2.
REMOVE NO. 1 FUEL SUB-TANK |
 |
Disengage the 5 claws and remove the fuel pump tank.
- Separate the connector and disengage the clamp.
| 3.
REMOVE FUEL PUMP ASSEMBLY |
 |
Disengage the clamp, then disconnect the connector.
- Disengage the 5 claws and separate the fuel pump from the fuel pump case.
- Disconnect the connector from the fuel pump.
| 4.
REMOVE FUEL PUMP FILTER |
 |
Remove the fuel filter from the fuel pump.
| 5.
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
 |
Remove the fuel pressure regulator and the 2 O-rings.