2011-2016 FJ Cruiser · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

A129900E02
  1. Install a new O-ring into the fuel pump case.

  1. Install a new O-ring onto the fuel pressure regulator.

  1. Install the pressure regulator.


2. INSTALL FUEL PUMP FILTER

A129899E01
  1. Install the fuel filter onto the fuel pump.


3. INSTALL FUEL PUMP ASSEMBLY

A129898
  1. Connect the fuel filter to the fuel pump.

  1. G036091
    Engage the 5 claw fittings and install the fuel pump onto the fuel pump case.

  1. A129894
    Engage the clamp, then connect the connector.


4. INSTALL NO. 1 FUEL SUB-TANK

A129893
  1. Install the connector and engage the clamp.

  1. A129892
    Engage the 5 claws and install the fuel pump tank.


5. INSTALL FUEL SENDER GAUGE ASSEMBLY

G036094
  1. Engage the claw and install the sender gauge by sliding it in the direction shown in the illustration.

  1. A129890
    Connect the connector.

← INSPECTION (from Aug 2014)REASSEMBLY (from Aug 2009) →