2011-2016 FJ Cruiser · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built Jul 2007 – Jul 2009


1. REMOVE RADIATOR DRAIN COCK PLUG
  1. Remove the drain cock plug.

  1. Remove the O-ring from the drain cock plug.


2. ASSEMBLE SST

A087082E07
SST
09230-01010   (09231-01010, 09231-01030)
  1. Engage the claw with the overhaul handle by inserting it into the hole in part A as shown in the illustration.

  1. While gripping the handle, adjust dimension B to between 0.2 and 0.3 mm, using the stopper bolt.

    Dimension B:
    0.2 to 0.3 mm (0.008 to 0.012 in)

    NOTICE:
    If the stopper bolt can not be adjusted, the claw may be damaged.


3. UNCAULK CORE PLATE

G036190E01
  1. Straighten the core plate by gripping it with SST until stopped by the stopper bolt.

    SST
    09230-01010   (09231-01010, 09231-01030)


4. REMOVE RADIATOR TANK UPPER

G036191E01
  1. Lightly tap the radiator tank bracket (or radiator tank pipe) with a soft-faced hammer to remove the radiator tank.


5. REMOVE RADIATOR TANK LOWER

HINT:
Perform the same procedures as for the radiator tank upper.

← REMOVAL (from Aug 2014)INSPECTION (Jul 2007 – Jul 2009) →