2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL IGNITION SWITCH ASSEMBLY (for LHD)
  1. Connect the connector.

  1. Install the ignition switch with the 2 screws.


2. INSTALL IGNITION SWITCH ASSEMBLY (for RHD)
  1. Install the ignition switch with the 2 screws.

  1. Connect the connector.

  1. Connect the connector clamp to the ignition switch.


3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)
  1. Connect the connectors.

  1. Engage the 8 clips and 4 guides and install the lower instrument panel finish panel.

  1. Install the 2 <E> bolts.


4. INSTALL INSTRUMENT PANEL FINISH PLATE (for RHD)

  1. E149563E03
    Install the instrument panel finish plate.
    Text in Illustration 
    *1
    Instrument Panel Finish Plate


5. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD)
  1. Engage the 3 claws and install the fuel lid lock open lever.


6. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)
  1. Engage the 3 claws and install the hood lock control lever.


7. INSTALL NO.1 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD)
  1. Engage the 4 clips and 2 claws and install the instrument panel register.


8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)
  1. Install the front door opening trim weatherstrip.


9. INSTALL COWL SIDE TRIM BOARD RH (for RHD)
  1. Engage the 2 claws and install the cowl side trim board.

  1. Install the clip.


10. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)
  1. Engage the 14 claws and install the door scuff plate.


11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← INSTALLATION (Nov 2010 – Jul 2012)PRECAUTION (from Jul 2007) →