REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 1. DRAIN TRANSFER OIL |
| 2. REMOVE LOWER TRANSFER CASE PROTECTOR |
![]() ![]() |
Remove the 4 bolts and protector.
| 3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY |
![]() ![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 nuts, 4bolts and 4 washers.
Place matchmarks on the propeller shaft flange and transfer flange.

Remove the 4 nuts, 4 washers and the propeller shaft assembly.
| 4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY |
Using a chisel and hammer, loosen the staked part of the lock nut.
Using SST to hold the companion flange, remove the lock nut.

- SST
- 09330-00021
Using SST, remove the companion flange.

- SST
- 09950-40011
(09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04051, 09957-04010, 09958-04011)
| 5. REMOVE TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL (for Front) |
Using a screwdriver and hammer, tap out the oil seal from the companion flange.
- NOTICE:
- Be careful not to damage the oil seal and companion flange contact surfaces.
| 6. REMOVE TRANSFER CASE OIL SEAL |
![]() ![]() |
Using SST, tap out the oil seal.
- SST
- 09308-00010
- NOTICE:
- Be careful not to damage the oil seal and case front contact surface.



