2011-2016 FJ Cruiser · Service Manual DRIVE LINE

REMOVAL

Removal / installation · Vehicles built from Jul 2007

HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(Click here)

2. REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

C097017E01
  1. Using SST, tap out the oil seal.

    SST
    09308-10010  

← COMPONENTS (from Jul 2007)INSTALLATION (from Jul 2007) →