INSTALLATION
Removal / installation · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1. INSTALL CLOCK ASSEMBLY |
Engage the 2 claws and install the clock assembly.

- HINT:
- Push the clock assembly in the direction shown in the illustration, to install it.
| 2. INSTALL RADIO RECEIVER ASSEMBLY |
Connect the connectors.

Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.
- Torque:
- 2.5 N*m{ 25 kgf*cm , 22 in.*lbf }
| 3. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY |
Connect the 3 connectors.
Engage the 4 clips and install the integration control panel assembly.
Install the 2 screws.
| 4. INSTALL INSTRUMENT PANEL GARNISH LH |
Engage the 3 clips and install the instrument panel garnish.
Install the screw <G>.
| 5. INSTALL INSTRUMENT PANEL GARNISH RH |
Engage the 3 clips and install the instrument panel garnish.
Install the screw <G>.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 3.9 N*m{ 40 kgf*cm , 35 in.*lbf }
