2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL GARNISH LH

  1. B133886
    Remove screw <H>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.


3. REMOVE INSTRUMENT PANEL GARNISH RH

  1. B133887
    Remove screw <H>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.


4. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY

  1. B133888
    Remove the 2 <H> screws.

  1. Disengage the 4 clips and remove the integration control panel assembly.

  1. Disconnect the 3 connectors.


5. REMOVE RADIO RECEIVER ASSEMBLY

  1. B130575
    Remove the 4 bolts and the radio receiver.

  1. B130576
    Disconnect the plug, the head unit connector and the 2 radio connectors.


6. REMOVE CLOCK ASSEMBLY

  1. E127828
    Disengage the 2 claws and remove the clock assembly.

    HINT:
    Pull the clock assembly out in the direction shown in the illustration to remove it.

← COMPONENTS (from Jul 2007)REMOVAL (from Nov 2010) →