2011-2016 FJ Cruiser · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL BACK DOOR OUTSIDE HANDLE
  1. Install the bush.

  1. B139406
    Install the back door outside handle with the screw.


2. INSTALL BACK WINDOW LOCK STRIKER ASSEMBLY

B139405
  1. Install the back window lock striker and retainer with the 2 screws.


3. INSTALL BACK WINDOW STAY UPPER BRACKET RH

B139404
  1. Install the back window stay upper bracket and retainer with the 2 screws.


4. INSTALL BACK WINDOW STAY UPPER BRACKET LH

HINT:
Use the same procedure as described for the RH side.


5. INSTALL BACK DOOR GLASS

B139403
  1. Install the back door glass with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the 2 connectors.


6. INSTALL BACK WINDOW SUPPORT LH

B135551
  1. Install the 2 stop rings onto the back window support.

  1. Install the back window support.


7. INSTALL BACK WINDOW SUPPORT RH

HINT:
Use the same procedure as for the LH side.


8. INSTALL REAR SPOILER

  1. B135163
    Install the rear spoiler with the 4 nuts.

  1. B135162
    w/ Rear Wiper:

    1. Connect the washer hose.

  1. Install the washer hose into the claw of the rear spoiler.

  1. Install the 3 clamps.

  1. Connect the high mounted stop light connector.


9. INSTALL NO. 1 REAR SPOILER COVER

E127215
  1. Install the No. 1 rear spoiler cover with the 4 screws.


10. INSTALL SPARE DISC WHEEL

Torque:
88 N*m{ 897 kgf*cm , 65 ft.*lbf }


11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← ADJUSTMENT (from Jul 2007)PARTS LOCATION (from Jul 2007) →