2011-2016 FJ Cruiser · Service Manual BODY

ADJUSTMENT

Removal / installation · Vehicles built from Jul 2007


1. INSPECT BACK DOOR GLASS

  1. Check that the clearance measurements are within the standard ranges.

    B139385E01

    Standard:
    Area
    Measurement
    Area
    Measurement
    A
    8 to 11 mm
    (0.315 to 0.433 in.)
    F
    4.5 to 7.5 mm
    (0.177 to 0.295 in.)
    B
    2 to 5 mm
    (0.079 to 0.197 in.)
    G
    2 to 5 mm
    (0.079 to 0.197 in.)
    C
    3.5 to 6.5 mm
    (0.138 to 0.256 in.)
    H
    2 to 5 mm
    (0.079 to 0.197 in.)
    D
    2 to 5 mm
    (0.079 to 0.197 in.)
    I
    3.5 to 6.5 mm
    (0.138 to 0.256 in.)
    E
    4.5 to 7.5 mm
    (0.177 to 0.295 in.)
    -
    -


2. ADJUST BACK DOOR GLASS

B140023
  1. Adjust the glass position.

    1. Loosen the glass side hinge nuts and adjust the glass position.

    2. Tighten the glass side hinge nuts after the adjustment.

      Torque:
      5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

← REMOVAL (from Jul 2007)INSTALLATION (from Jul 2007) →