REMOVAL
Removal / installation · Vehicles built from Aug 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| 1. REMOVE V-BANK COVER |
Raise the front of the V-bank cover to disengage the 2 pins.

Remove the 2 V-bank cover hooks from the bracket.
Remove the V-bank cover.
Text in Illustration *1
Pin
*2
Hook
| 2. REMOVE AIR CLEANER HOSE ASSEMBLY |
Disconnect the ventilation hose and vacuum hose.

Disengage the wire harness clamp.
Remove the bolt.
Loosen the 2 hose clamps.
Remove the air cleaner hose assembly.
| 3. REMOVE VVT SENSOR (for Intake Side of Bank 1) |
Disconnect the sensor connector.

Remove the bolt and sensor.
| 4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1) |
Disconnect the sensor connector.

Remove the bolt and sensor.
| 5. REMOVE VVT SENSOR (for Intake Side of Bank 2) |
Disconnect the sensor connector.

Remove the bolt and sensor.
| 6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2) |
Disconnect the sensor connector.

Remove the bolt and sensor.
