2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


INSPECT KNOCK SENSOR

  1. A093606E16
    Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Knock Sensor)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    120 to 280 kΩ

    If the resistance is not as specified, replace the sensor.

← INSPECTION (Jul 2007 – Jul 2009)INSTALLATION (Jul 2007 – Jul 2009) →