2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


INSPECT KNOCK SENSOR

A093606E03
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (Ground) - 2 (Output)
      120 to 180 kΩ at 20°C (68°F)

      If the result is not as specified, replace the knock sensor.

← REMOVAL (from Nov 2010)INSPECTION (from Aug 2009) →