INSTALLATION
Removal / installation · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
INSTALL BACK SONAR SWITCH BULB CAP |
 |
Install the back sonar switch bulb cap.
| 2.
INSTALL BACK SONAR SWITCH BULB |
 |
Install the back sonar switch bulb.
| 3.
INSTALL BACK SONAR SWITCH ASSEMBLY |
 |
Engage the 2 claws and install the back sonar switch.
| 4.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
|
 |
Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <E> bolts and 2 clips.
| 5.
INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD)
|
 |
- Slide the console upper panel garnish toward the front of the vehicle and engage guide.
Engage the claw and 2 clips and install the console upper panel garnish.
| 6.
INSTALL FRONT CONSOLE BOX
|
 |
Engage the 5 guides and install the front console box.
Install the 4 <H> bolts.
| 7.
INSTALL FRONT CONSOLE BOX BOTTOM MAT
|
 |
Install the box bottom mat.
| 8.
INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY
|
 |
Engage the 3 guides and 5 clips and install the console upper rear panel.
| 9.
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
- Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.
Engage the 4 claws and install the parking brake hole cover.
| 10.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
|
 |
- Install the shift lever knob.
| 11.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
|
 |
- Install the shift lever knob.