2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. INSTALL BACK SONAR SWITCH BULB CAP

  1. B135187
    Install the back sonar switch bulb cap.


2. INSTALL BACK SONAR SWITCH BULB

  1. B135186
    Install the back sonar switch bulb.


3. INSTALL BACK SONAR SWITCH ASSEMBLY

  1. B135185
    Engage the 2 claws and install the back sonar switch.


4. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY

  1. B133852
    Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <F> bolts and 2 clips.


5. INSTALL FRONT CONSOLE BOX

  1. B133851
    Engage the 5 claws and install the front console box.

  1. Install the 4 <D> screws.


6. INSTALL FRONT CONSOLE BOX BOTTOM MAT

  1. B133899
    Install the box bottom mat.


7. INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY

  1. B133897
    Engage the 3 claws and 5 clips and install the console upper rear panel.


8. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.


9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133896
    Install the shift lever knob.


10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133894
    Install the shift lever knob.


11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← INSPECTION (from Jul 2007)INSTALLATION (from Nov 2010) →