2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT BACK SONAR SWITCH ASSEMBLY

  1. B135188E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      4 (ECU) - 6 (E)
      OFF
      Below 1 Ω
      3 (IG) - 6 (E)
      ON
      Below 1 Ω
      4 (ECU) - 6 (E)
      Below 1 Ω

      If the result is not as specified, replace the back sonar switch.

  1. Check the operation.

    1. Apply battery voltage to the terminals and check that the indicator illuminates.

      Standard:
      Condition
      Standard
      Positive battery - Terminal 1 (ILL+)
      Negative battery - Terminal 2 (ILL-)
      Illuminates

      If the result is not as specified, check the back sonar switch bulb.


INSPECT BACK SONAR SWITCH BULB

  1. B138462E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      7 to 11 Ω at 20°C (68°F)

      If the result is not as specified, replace the back sonar switch bulb.

← REMOVAL (from Nov 2010)INSTALLATION (Jul 2007 – Oct 2010) →