2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


INSPECT STEERING PAD SWITCH

  1. B135138E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      12 (AU1) - 10 (EAU)
      All switches released
      Approximately 100 kΩ
      SEEK+ switch: pushed in
      2.5 Ω or less
      SEEK- switch: pushed in
      Approximately 329 Ω
      VOL+ switch: pushed in
      Approximately 1000 Ω
      VOL-+ switch: pushed in
      Approximately 3110 Ω
      11 (AU2) - 10 (EAU)
      All switches released
      Approximately 100 kΩ
      MODE switch: push in
      2.5 Ω or less

      If the result is not as specified, replace the steering pad switch.

  1. Check the operation.

    1. Apply battery voltage to the terminals and check that the indicator illuminates.

      Standard:
      Condition
      Standard
      Positive battery - Terminal 1 (IL+2)
      Negative battery - Terminal 10 (EAU)
      Illuminates

      If the result is not as specified, replace the steering switch.

← REMOVAL (from Aug 2012)INSPECTION (from Nov 2010) →