2011-2016 FJ Cruiser · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Jul 2014 from Aug 2014

Camshaft timing oil control valve assembly
OCV OFF
Standard
Normal engine speed
OCV ON
Rough idle or engine stalled
Throttle body
Throttle POS value
Standard
60 % or more
Resistance
1 (M-) - 2 (M+)
Standard
0.3 to 100 Ω at 20°C (68°F)
Accelerator pedal position sensor (ACCEL POS#1)
Voltage
Accelerator pedal released
Standard
0.5 to 1.1 V
Accelerator pedal depress
2.5 to 4.5 V
Accelerator pedal position sensor (ACCEL POS#2)
Voltage
Accelerator pedal released
Standard
1.2 to 2.0 V
Accelerator pedal depress
3.4 to 5.0 V
Camshaft timing oil control valve assembly
Resistance
1 (+B) - 2 (GND)
Standard
6.9 to 7.9 Ω at 20°C (68°F)
Mass air flow meter
Standard
0.72 g/sec
Engine coolant temperature sensor
Resistance
1 (E2) - 2 (THW)
Standard
2.32 to 2.59 kΩ at 20°C (68°F)
0.310 to 0.326 kΩ at 80°C (176°F)
Knock sensor
Resistance
1 (Ground) - 2 (Out put)
120 to 180 kΩ at 20°C (68°F)
Circuit opening relay
Resistance
3 - 5
Standard
10 kΩ or higher
Below 1 Ω
1 - 2
Below 1 Ω (Apply battery voltage to terminals 1 and 2)
EFI relay
Resistance
3 - 5
Standard
10 kΩ or higher
Below 1 Ω (Apply battery voltage to terminals 1 and 2)
Crankshaft position sensor
Resistance
1 - 2
Standard
1850 to 2450 Ω at 20°C (68°F)
Fuel pump relay
Resistance
1 - 2
Standard
Below 1 Ω
3 - 4
Below 1 Ω
3 - 5
10 kΩ or higher
3 - 4
10 kΩ or higher (Battery voltage applied to terminal 1 and 2)
3 - 5
Below 1 Ω (Battery voltage applied to terminal 1 and 2)
← HOW TO DETERMINE NUT STRENGTH (from Jul 2007)SERVICE DATA (Aug 2009 – Jul 2014) →