2011-2016 FJ Cruiser · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Jul 2014 from Aug 2014

Camshaft timing oil control valve assembly
Resistance:
1 - 2
6.9 to 7.9 Ω at 20 °C (68°F)
Throttle with motor body assembly
Resistance
1(M-) - 2(M+)
0.3 to 100 Ω at 20 °C (68°F)
Accelerator pedal position No. 1 standard voltage
Voltage
Accelerator pedal released
0.5 to 1.1 V
Accelerator pedal depressed
2.6 to 4.5 V
Accelerator pedal position No. 2 standard voltage
Voltage
Accelerator pedal released
1.2 to 2.0 V
Accelerator pedal depressed
3.4 to 5.0 V
Mass air flow meter
Resistance
1(THA) - 2(E2)
13.6 to 18.4 KΩ at -20 °C (4°F)
2.21 to 2.69 KΩ at 20 °C (68°F)
0.49 to 0.67 KΩ at 60 °C (140°F)
Crankshaft position sensor
Resistance
1 - 2
1850 to 2450 Ω at 20°C (68°F)
Engine coolant temperature sensor
Resistance:
1 - 2
2.32 to 2.59 Ω at 20 °C (68°F)
1 - 2
0.310 to 0.326 Ω at 80°C (176°F)
Knock sensor
Resistance
1 - 2
120 to 280 Ω at 20 °C (68°F)
Air fuel ratio sensor (w/o Secondary Air Injection System)
for Bank1
Resistance
2(+B) - 1(HA1A)
1.8 to 3.4 Ω at 20°C (68°F)
1(HA1A) - 4(A1A-)
10 kΩ or higher
for Bank2
Resistance
2(+B) - 1(HA2A)
1.8 to 3.4 Ω at 20°C (68°F)
1(HA2A) - 4(A2A-)
10 kΩ or higher
Heated oxygen sensor
for Bank1
Resistance
1(HT1B) - 2 (+B)
11 to 16 Ω at 20°C (68°F)
1(HT1B) - 4 (E2)
10 kΩ or higher
for Bank2
Resistance
1(HT2B) - 2 (+B)
11 to 16 Ω at 20°C (68°F)
1(HT2B) - 4 (E2)
10 kΩ or higher
EFI relay
Resistance
3 - 5
10 kΩ or higher (Battery voltage not applied)
Below 1 Ω (Battery voltage applied to terminals 1 and 2)
Circuit opening relay
Resistance
3 - 5
10 kΩ or higher (Battery voltage not applied)
1 - 2
Below 1 Ω (Battery voltage applied to terminals 1 and 2)
A/F sensor heater relay
Resistance
3 - 4
Below 1 Ω (Battery voltage not applied)
10 kΩ or higher (Battery voltage applied to terminals 1 and 2)
3 - 5
10 kΩ or higher (Battery voltage not applied)
Below 1 Ω (Battery voltage applied to terminals 1 and 2)
← SERVICE DATA (Aug 2009 – Jul 2014)TORQUE SPECIFICATIONS (Jul 2007 – Jul 2009) →