2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Aug 2009 – Jul 2014

Versions by build date: Aug 2009 – Jul 2014 from Aug 2014


INSPECT AIR FUEL RATIO SENSOR

  1. A159233E24
    Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected:
    (Air Fuel Ratio Sensor)
    *b
    for Bank 1:
    *c
    for Bank 2:

    Standard Resistance (for Bank 1):
    Tester Connection
    Condition
    Specified Condition
    1 (HA1A) - 2 (+B)
    20°C (68°F)
    1.8 to 3.4 Ω
    1 (HA1A) - 4 (A1A-)
    Always
    10 kΩ or higher

    Standard Resistance (for Bank 2):
    Tester Connection
    Condition
    Specified Condition
    1 (HA2A) - 2 (+B)
    20°C (68°F)
    1.8 to 3.4 Ω
    1 (HA2A) - 4 (A2A-)
    Always
    10 kΩ or higher

    If the result is not as specified, replace the air fuel ratio sensor.

← REMOVAL (from Aug 2014)INSPECTION (from Aug 2014) →