2011-2016 FJ Cruiser · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Nov 2010 – Jul 2012 from Aug 2012


1. REMOVE FRONT SEAT ASSEMBLY
(Click here)

2. REMOVE REAR SEAT ASSEMBLY RH
(Click here)

3. REMOVE REAR SEAT ASSEMBLY LH
(Click here)

4. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271473
    Disengage the 4 claws.

  1. Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 guides and remove the parking brake hole cover.


5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133893
    Remove the shift lever knob.


6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133895
    Remove the shift lever knob.


7. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY

  1. B271474
    Shift the shift lever into the N position.

  1. Disengage the 5 clips and 3 guides and remove the console upper rear panel.


8. REMOVE BOX BOTTOM MAT

  1. B133899
    Remove the box bottom mat.


9. REMOVE FRONT CONSOLE BOX

  1. B271475
    Remove the 4 <H> bolts.

  1. Disengage the 5 guides and remove the console box.


10. REMOVE FRONT DOOR SCUFF PLATE RH

  1. B130597
    Disengage the 14 claws and remove the front door scuff plate.


11. REMOVE FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.


12. REMOVE REAR DOOR SCUFF PLATE RH

  1. B130598
    Disengage the 6 claws and remove the access door scuff plate.


13. REMOVE REAR DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.


14. REMOVE COWL SIDE TRIM BOARD RH

  1. B130599
    Remove the clip.

  1. Disengage the 2 claws and remove the cowl side trim board.


15. REMOVE COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure as for the RH side.


16. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
  1. Separate the front door opening trim weatherstrip RH.


17. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Separate the front door opening trim weatherstrip LH.


18. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B133853
    Disengage the 4 clips and 2 claws and remove the instrument panel register.

    NOTICE:
    1. To avoid breakage of the register, remove the instrument panel register with the shut damper of the register open.
    2. Pull the instrument panel register up diagonally to remove it.


19. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

  1. B133859
    Disengage the 3 claws and separate the hood lock control lever.


20. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

  1. B267057
    Disengage the 3 claws and separate the fuel lid lock open lever.

  1. Disconnect the fuel lid lock control cable from fuel lid lock open lever.


21. REMOVE INSTRUMENT PANEL FINISH PLATE

  1. E149562E03
    Using a screwdriver with its tip wrapped in protective tape, remove the instrument panel finish plate.
    Text in Illustration 
    *1
    Protective Tape
    *2
    Instrument Panel Finish Plate


22. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

  1. B267058
    Remove the 2 <E> bolts.

  1. Disengage the 8 clips and 4 guides.

  1. Disconnect the connectors and remove the lower instrument panel finish panel.


23. REMOVE CONSOLE UPPER PANEL NO. 1 GARNISH

  1. B267053
    Disengage claw and the 2 clips.

  1. Slide the console upper panel garnish toward the rear of the vehicle, disengage the guide and remove the console upper panel garnish.


24. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY

  1. B133852
    Remove the 2 clips and 2 <E> bolts.

  1. Disengage the 3 clips and 2 claws and remove the instrument lower cover.


25. REMOVE REAR FLOOR BOARD

  1. B135073E05
    Remove the bolt and the luggage hold belt striker.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

    HINT:
    Use the same procedure for both sides.

  1. B135075
    Disengage the clip and the claw and remove the rear floor board.


26. REMOVE REAR FLOOR MAT SUPPORT PLATE

  1. B130592
    Remove the 5 screws.

  1. B130593
    Disengage the 11 claws and remove the rear floor mat support plate.


27. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT:
Use the same procedure for both sides.

  1. B179163E04
    Remove the cap.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

  1. Remove the bolt and the luggage hold belt striker.


28. REMOVE REAR FLOOR MAT ASSEMBLY

  1. B130594
    Using a clip remover, remove the 2 clips and the rear floor mat.


29. REMOVE PACKAGE HOLDER NET HOOK

B271495E01

HINT:
Use the same procedure to remove all the package holder net hooks.

Text in Illustration 
*a
for RH Side without Woofer
*b
for LH Side
  1. Remove the screw and the package holder net hook.


30. REMOVE LAP BELT OUTER ANCHOR COVER

B130614E05

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Disengage the 3 claws and remove the lap belt outer anchor cover.


31. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH

  1. B130615
    Remove the bolt and the anchor plate.


32. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

  1. B130618
    Remove the 3 screws.

  1. B130619
    Disengage the 6 clips and the 8 claws and remove the deck trim side panel.


33. REMOVE FLOOR CARPET HOOK

  1. B266365
    Remove the 2 screws and 2 floor carpet hooks.

  1. Remove the 2 clips and 2 floor carpet hooks.


34. REMOVE FRONT FLOOR MAT
  1. Remove the 2 clips.

  1. Disengage the 14 clamps and remove the front floor mat.


35. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

  1. B266347
    Separate the fuel lid lock control cable by rotating it from the fuel filler opening lid lock retainer as shown in the illustration.
    Text in Illustration 
    V100135
    Turn
    V100136
    Pull Out

  1. Disengage the clamps and remove the fuel lid lock control cable.

    B266346E01

    Text in Illustration 
    *1
    Fuel Lid Lock Control Cable
    *2
    Clamp


36. REMOVE FUEL FILLER OPENING LID LOCK RETAINER

  1. B266349
    Remove the fuel filler opening lid lock retainer by rotating it as shown in the illustration.
    Text in Illustration 
    V100135
    Turn
    V100136
    Pull Out

← COMPONENTS (from Aug 2012)REMOVAL (from Aug 2012) →