INSTALLATION
Removal / installation · Vehicles built Nov 2010 – Jul 2014
Versions by build date: Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
| 1.
INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) |
 |
- Using SST, tighten the air fuel ratio sensor.
Text in Illustration
*a
|
Fulcrum Length
|
- SST
- 09224-00010
-
Torque:
- without SST:
- 44 N*m{
449 kgf*cm
, 32 ft.*lbf
}
- with SST:
- 40 N*m{
408 kgf*cm
, 30 ft.*lbf
}
- HINT:
- The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
- The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) (Click here).
- This torque value is effective when SST is parallel to the torque wrench.
| 2.
INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
 |
- Using SST, tighten the air fuel ratio sensor.
Text in Illustration
*a
|
Fulcrum Length
|
- SST
- 09224-00010
-
Torque:
- without SST:
- 44 N*m{
449 kgf*cm
, 32 ft.*lbf
}
- with SST:
- 40 N*m{
408 kgf*cm
, 30 ft.*lbf
}
- HINT:
- The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
- The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) (Click here).
- This torque value is effective when SST is parallel to the torque wrench.
| 3.
INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY |
 |
Install the exhaust manifold (Click here).