REMOVAL
Removal / installation · Vehicles built Aug 2009 – Oct 2010
Versions by build date: Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
- CAUTION:
- Wear protective gloves when removing the sensor.
- The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe assembly has cooled down before removing it.
| 1.
REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY |
 |
Remove the exhaust manifold (Click here).
| 2.
REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
 |
- Using SST, remove the sensor.
- SST
- 09224-00010
| 3.
REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) |
 |
- Using SST, remove the sensor.
- SST
- 09224-00010