2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Nov 2010 – Jul 2014

Versions by build date: Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014

CAUTION:
  1. Wear protective gloves when removing the sensor.
  2. The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
  3. Confirm that the exhaust pipe assembly has cooled down before removing it.


1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY
  1. Remove the exhaust manifold (Click here).


2. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

  1. A223682E02
    Using SST, remove the sensor.
    SST
    09224-00010  


3. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

  1. A223684E02
    Using SST, remove the sensor.
    SST
    09224-00010  

← REMOVAL (Aug 2009 – Oct 2010)REMOVAL (from Aug 2014) →