FAIL-SAFE CHART
System information · Vehicles built Nov 2010 – Jul 2012
Versions by build date: Nov 2010 – Jul 2012 from Aug 2012
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| Vehicle speed pulse is interrupted |
Controls input signals as 0 km/h (0 mph) |
Normal data is received |
| Vehicle speed signal is interrupted for 0.12 seconds |
Controls input signals as 0 km/h (0 mph) |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| Engine revolution signal is interrupted for 0.12 seconds |
Controls input signals as 0 rpm |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| Vehicle speed pulse signal integrated value not input 3 seconds or more |
Controls input signal as 0 km/h (0 mph) |
Normal data is received |
| EEPROM cannot determine constant value due to EEPROM reading malfunction or other malfunction |
Default control |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| EEPROM cannot determine constant value due to EEPROM reading malfunction or other malfunction |
Default control |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, engine coolant temperature data is interrupted for 3.1 seconds |
Gauge needle indicates below "C" |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, vehicle speed pulse signal integration value is interrupted for 0.12 seconds |
Data received most recently remains displayed |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, passenger seat belt buckle switch signal and occupant detection signal is interrupted |
Display condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, A/T OIL TEMP warning signals are interrupted |
Display condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, CRUISE main indicator light signal is interrupted for 3.1 seconds |
Display condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, SRS warning light on/blink request signal (9.0 V or higher) is interrupted for 10 seconds, or SRS warning light on/blink request signal (below 9 V) is interrupted for 60 seconds |
SRS warning light remains on until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| Frame data (including SLIP indicator on/blink request signal) is interrupted |
SLIP indicator light condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, VSC OFF indicator light signal is interrupted |
Display condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, A-TRAC indicator light signal is interrupted |
Display condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, TRC OFF indicator light signal is interrupted |
Display condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, ABS warning light signal is interrupted for 1 second |
ABS warning light remains on until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| While ignition switch is ON, brake warning light signal is interrupted for 1 second |
Brake warning light condition is maintained until ignition switch off |
Normal data is received |
| Condition |
Fail-safe Operation |
Fail-safe Deactivation Condition |
| Vehicle speed signal is interrupted for 0.12 seconds |
Controls input signals as 0 km/h (0 mph) |
Normal data is received |