2011-2016 FJ Cruiser · Service Manual SECURITIES

INSTALLATION

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL TRANSPONDER KEY AMPLIFIER

  1. E149558
    Engage the 2 claws and install the transponder key amplifier.

  1. Connect the connector.


2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)
  1. Engage the 5 clips and claw and install the lower instrument panel finish panel.

  1. Install the 2 <E> bolts.


3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)
  1. Connect the connectors.

  1. Engage the 8 clips and 4 guides and install the lower instrument panel finish panel.

  1. Install the 2 <E> bolts.


4. INSTALL INSTRUMENT PANEL FINISH PLATE

  1. E149563E03
    Install the instrument panel finish plate.
    Text in Illustration 
    *1
    Instrument Panel Finish Plate


5. CONNECT FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD)
  1. Engage the 3 claws and install the fuel lid lock open lever.


6. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
  1. Engage the 3 claws and install the hood lock control lever.


7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Engage the 4 clips and 2 claws and install the instrument panel register.


8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the front door opening trim weatherstrip.


9. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure as for the RH side (Click here).


10. INSTALL FOOTREST CLIP (for LHD)

B130588

HINT:
Use the same procedure for both sides.

  1. Engage the 2 claws and install the footrest clip.


11. INSTALL FRONT FLOOR FOOTREST (for LHD)

  1. B130589
    Engage the 2 studs and install the front floor footrest.


12. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side (Click here).

← INSTALLATION (Nov 2010 – Jul 2012)PRECAUTION (from Jul 2007) →