2011-2016 FJ Cruiser · Service Manual SECURITIES

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL TRANSPONDER KEY AMPLIFIER

E149558
  1. Engage the 2 claws and install the transponder key amplifier.

  1. Connect the connector.


2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

E146361
  1. Engage the claw and 5 clips and install the lower instrument panel finish panel.

  1. Tighten the 2 bolts.


3. INSTALL INSTRUMENT PANEL FINISH PLATE

E149563E02
  1. Install the instrument panel finish plate.


4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

  1. B133859
    Engage the 3 claws and install the hood lock control lever.


5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B133853
    Engage the 4 clips and 2 claws and install the instrument panel register.


6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side (Click here).


7. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure as for the RH side (Click here).


8. INSTALL FOOTREST CLIP

B130588

HINT:
Use the same procedure for both sides.

  1. Engage the 2 claws and install the footrest clip.


9. INSTALL FRONT FLOOR FOOTREST

  1. B130589
    Engage the 2 studs and install the front floor footrest.


10. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side (Click here).

← REMOVAL (from Aug 2012)INSTALLATION (Nov 2010 – Jul 2012) →