REMOVAL
Removal / installation · Vehicles built Nov 2010 – Jul 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
REMOVE FRONT DOOR SCUFF PLATE LH |
 |
- HINT:
- Use the same procedure as for the RH side (Click here).
| 2.
REMOVE FRONT FLOOR FOOTREST (for LHD)
|
 |
- Disengage the 4 claws and remove the front floor footrest.
| 3.
REMOVE FOOTREST CLIP (for LHD)
|
 |
- Remove the 2 footrest clips.
| 4.
REMOVE COWL SIDE TRIM BOARD LH |
 |
- HINT:
- Use the same procedure as for the RH side (Click here).
| 5.
SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
|
 |
Separate the front door opening trim weatherstrip LH.
| 6.
REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
- Disengage the 4 clips and 2 claws and remove the instrument panel register.
- NOTICE:
- To avoid breakage of the register, remove the instrument panel register with the shut damper of the register open.
- Pull the instrument panel register up diagonally to remove it.
| 7.
SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
|
 |
- Disengage the 3 claws and separate the hood lock control lever.
| 8.
SEPARATE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD)
|
 |
- Disengage the 3 claws and separate the fuel lid lock open lever.
| 9.
REMOVE INSTRUMENT PANEL FINISH PLATE
|
 |
- Using a screwdriver with its tip wrapped in protective tape, remove the instrument panel finish plate.
Text in Illustration
*1
|
Protective Tape
|
*2
|
Instrument Panel Finish Plate
|
| 10.
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)
|
 |
- Remove the 2 <E> bolts.
Disengage the 5 clips and claw and remove the lower instrument panel finish panel.
| 11.
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)
|
 |
- Remove the 2 <E> bolts.
Disengage the 8 clips and 4 guides.
Disconnect the connectors and remove the lower instrument panel finish panel.
| 12.
REMOVE TRANSPONDER KEY AMPLIFIER |
 |
- Disconnect the connector.
Text in Illustration
*1
|
Protective Tape
|
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the transponder key amplifier.